basta73
-
Posts
69 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Blogs
Gallery
Posts posted by basta73
-
-
So,
how do I figure out how much power will be consumed by a midibox? I think I understand simple consumption like LED's, switches and pots, but, how do you figure out how much power will be consumed by motorfaders?
I was under the impression that 1000 mA was the absolute highest that should run through the core, but...
???
I consciously got motorfaders that were 5v to keep that much consistent.
Any input would be greatly appreciated. ;)
-
can LC-emu handle:
joysticks for surround panning? one per channel?
multiple rotary encoders per channel?
any other surprises?
-
Is there a way to use 4-bit rotary encoders? Or to change their functionality by not using some pins, so that they act as 2-bit encoders?
Any other encoder insight would be appreciated.
-
Under NG, will it be possible to mix and match encoders and switches (or LED's and LED rings) on a single core?
ex. 32 encoders and 64 switches
-
I found some at www.allelectronics.com
Top is square, and LED color/brightness is unknown to me.
Enter "PB-125" at their search prompt to check it out.
:P
-
I found some at www.allelectronics.com
Top is square, and LED color/brightness is unknown to me.
Enter "PB-125" at their search prompt to check it out.
:P
-
Can anyone elaborate on implementing motorfaders. Â
I am specifically interested in the Panasonic # EVANMKP08B14, that some of you (like me) may have picked up from Allelectronics. Â I grabbed these because they work on a 5v supply. Â I was just interested in anyones opinion regarding these pots. Â reviews, shortcomings, whatnots.
Anyone else's experience with any motorpots would be appreciated.
-
Can anyone elaborate on implementing motorfaders. Â
I am specifically interested in the Panasonic # EVANMKP08B14, that some of you (like me) may have picked up from Allelectronics. Â I grabbed these because they work on a 5v supply. Â I was just interested in anyones opinion regarding these pots. Â reviews, shortcomings, whatnots.
Anyone else's experience with any motorpots would be appreciated.
-
Once again, thank you.
-
Once again, thank you.
-
I hope this makes sense, please bear with me.
At the stage of redesigning my project due to NG anticipation euphoria.
From the MF core, how many LEDs, Switches, can I use? Must I use?
MORE INFO:
Assuming a MegaMidiBox design with some version of a Midibox NG linked to 16 motorfaders. I understand that the NG can handle 128 In/Out/Analog, but I am confused by a Multi-core system. One core for the NG, and 2 cores for the 16 motorfaders... What will the minimum/maximum things to solder from each MF core be?
-
I hope this makes sense, please bear with me.
At the stage of redesigning my project due to NG anticipation euphoria.
From the MF core, how many LEDs, Switches, can I use? Must I use?
MORE INFO:
Assuming a MegaMidiBox design with some version of a Midibox NG linked to 16 motorfaders. I understand that the NG can handle 128 In/Out/Analog, but I am confused by a Multi-core system. One core for the NG, and 2 cores for the 16 motorfaders... What will the minimum/maximum things to solder from each MF core be?
-
That's a great point. Besides, there's no point repeating what's on the monitor anyway.
-
That's a great point. Besides, there's no point repeating what's on the monitor anyway.
-
Has anyone had any success with LED bargraph displays? Might look good to have bargraphs showing sound signal levels.
I'm sure it is very similar to implementing LED rings. Â Where are the pages that show how to implement LED rings?
Thanks.
-
Has anyone had any success with LED bargraph displays? Might look good to have bargraphs showing sound signal levels.
I'm sure it is very similar to implementing LED rings. Â Where are the pages that show how to implement LED rings?
Thanks.
-
Thanks a lot!
-
I have a stupid question about parts. Should I get 1/2 watt or 1/4 watt resistors for the mbhp projects?
Motorfaders?
in Parts Questions
Posted
Has anyone tried to modify their motorfaders to make them more responsive, or to add/adjust touch sensitivity?