Jump to content

daemonik

Members
  • Content Count

    48
  • Joined

  • Last visited

Everything posted by daemonik

  1. I have to reduce some of my music equipment.... and decided to sell my MB-6582, since I barely use it! The synth was assembled by me, works perfectly and is in a very good condition! It is a very unique unit!! Find the gallery here: Case and potentiometer knobs are made of Lego (suitable for SIDchip sound) The display is in 'rusty-orange' and matches the orange flat-top LEDs. This MB6582 is expanded with an active mixer circuit (+/-12V supply). It has a main L/R out, volume-pot for each engine and a Stereo/Mono switch for each engine (in mono mode the signa
  2. daemonik

    Lego MB6582

    MB6582 fitted into a Lego case I also added an active mixer with Volume control for each of the 4 SID Synths and a main LR Out All with the help of R2D2 :)
  3. Ohhh... a new release.. again? awesome! thanks alot.. you are crazy man (in the good sense of course!!!) StepTrigger sounds fantastic - root note handling too (but I only have monophonic synths connected to the SEQ for the moment) I have a minor thing that I implemented a year ago (or so) that could be interesting to others too - maybe making it to a next release: While in Slave-Mode the SEQ listens to Midi Start/Stop/Continue messages from my DAW... as intended! However when working in the DAW I often want the SEQ to ignore those messages so it does not start everytime I hit play in
  4. I've been extensively investigating the arpeggiator of the SEQ V4 recently. most of the time I play it directly ('live') from a keyboard plugged to the SEQ V4 ...it's AMAZING!!! very sophisticated but still quite easy to use. Sometimes I'm just fiddling for hours with my new combo Keyboard > SEQ V4 > TTSH... very meditative! makes me smile... But now my question: The arpeggiator does not seem to forward other information than notes (note stackes) to the respective track via the selected Bus, e.g. PitchBend, ModWheel or other CC so i can not play an arpeggio with the keyboard an
  5. daemonik

    MB6582-top.jpg

    From the album: Lego MB6582

    My MB6582 was finally fitted into a Lego case years after it was finished (some ideas need some time) knobs are also Lego filled with epoxy and then drilled It also has an additional active mixer stage after the switched individual outs - with volume pot for each of the 4 SID Synths, a mono/stereo switch and a main L/R Out all with the help of R2D2 :)

    © nick bornhauser

  6. daemonik

    MB6582_back.jpg

    From the album: Lego MB6582

    © nick bornhauser

  7. daemonik

    MB6582_angle.jpg

    From the album: Lego MB6582

    © nick bornhauser

  8. For those who are interested After excessive code investigation... I finally found I very simple and quick solution. Already implemented is the following function: When pressing Stop button while running in slave-mode SEQ goes to 'muted slaveclock' state and stops running but keeps in sync with incoming midiclock - by pressing Play this state is changed to 'off' and SEQ starts playing on next measure again. Same state is set/unset with Pause button in slave-mode. What I wanted to avoid is that a MIDI Start/Continue would also set 'muted slaveclock' off and set SEQ running again. So I can play/
  9. The MBSeqV4 is still one of my fav. machines... but recently I got myself an Ableton Push. That got me back to work more in Ableton Live again with MBSeqV4 in Auto/Slave Mode and a couple of Synths connected to it. In general this setup works seamlessly for me. But now I'm looking to integrate a function to filter midi start/stop/cont events in SlaveMode to keep the Seq from playing notes each time Ableton starts: The function shall be quickly accessible from the UIThe function is only accessible in Slave/Auto Mode (makes no sense in Master Mode)Midi Clock shall still be forwarded to Midi-Outs
  10. 2*8580 are gone! 4*6582 are still available - but only up to 3th of january - cause I'm away for travelling with my family until end of august SOLD! So... If you feel like sponsoring an elephant-ride, or whale-watching or a jungle-trip for my two little girls go buy some SID's!!! :rofl:
  11. Hi I've 4x 6582 SID's and 2x 8580 SID's for sale: 6582's are unused ones (well, quickly tested in a MB6582, they seem to work fine) from wilba's mega-sale. asking: CHF 30.- (~25 €) each + shipping 8580's are used ones, tested in a MB6582, and also working fine asking: CHF 24.- (~20€) each + shipping If you take all the 6 SID's, it's 120€ + shipping If you take all the 4 6582 SID's, its 90€ + shipping Shipping is about 2.50€ / 8€ (not insured/ insured) to EU There are also 2x spare 18F4685's which I dont need anymore asking: CHF 8.- (~6€) each + ship
  12. Thanks for your comments... It means a lot to me!!! I uploaded some more pics to my gallery...
  13. daemonik

    daemonik

    Midibox stuff by daemonik
  14. From the album: daemonik

    Finished!!!!!! well... actually a rear-plate and sied-plates are still missing
  15. From the album: daemonik

    first assembly rear-view
  16. From the album: daemonik

    first assemly.... getting excited
  17. From the album: daemonik

    Glueing bolts for button-veroboards and data-encoder to frontplate frontplate manufactured by Schaeffer
  18. From the album: daemonik

    Glueing bolts for LCD's and custom Encoder/Step-Button PCB's to frontplate frontplate manufactured by Schaeffer
  19. From the album: daemonik

    housing bottom, rear-view with Core_STM32, Quad IIC_MIDI, SD_Slot, Olimex MOD-ENC28J60
  20. From the album: daemonik

    housing bottom with Core_STM32, Quad IIC_MIDI, SD_Slot, Olimex MOD-ENC28J60
×
×
  • Create New...