Search the Community
Showing results for tags 'midification'.
-
From the album: TekkStar (Tama Techstar Midification)
hmmm I have the replace 2 Potentiometers of the clap section ---- no problem, below is enough place for it! a little big is this thing... but it is for PLAYING not for SETUPing ... well with my big fingers. -
From the album: TekkStar (Tama Techstar Midification)
because i realy love it - a shot again :) -
From the album: TekkStar (Tama Techstar Midification)
I love it really I love it! -
From the album: TekkStar (Tama Techstar Midification)
after ours and ours later - the trigger matrix is born -
From the album: TekkStar (Tama Techstar Midification)
well a cd marker is not the best solution to paint a pcb black... it looses colour... -
From the album: TekkStar (Tama Techstar Midification)
4 Kill switches 1 Over-Roll-Button 1 Velocity Invert Button 1 Random-Kill-Fader 1 Velocity Offest-Fader -
From the album: TekkStar (Tama Techstar Midification)
last test with the minimal UI -
From the album: TekkStar (Tama Techstar Midification)
Well more space 4 Fingers, but to bib 4 this project -
From the album: TekkStar (Tama Techstar Midification)
this is only for testing (one row is left...) its from an old sid -
From the album: TekkStar (Tama Techstar Midification)
but i think this is what it will be in the end -
From the album: TekkStar (Tama Techstar Midification)
The big spacer is to big!!!! the small maybe a bit to small - so i will order 100 small ones, and 100 1mm bigger... -
From the album: TekkStar (Tama Techstar Midification)
this spacers are a bit to short,,,, but maybe they are not, and the LED that look out 0,5mm will uliminate the Acrylic Glass perfect...maybe... anywhere i dont have enough spacers now... i will order 100 from both variantes -
From the album: TekkStar (Tama Techstar Midification)
ok, if i drill braille (Deut: Blindenschrift) on it, maybe like an cube-eye (Deut: Würfelauge) I could play it blind, like writing on the laptop, and finding thes "F" and "J" Marks.... -
From the album: TekkStar (Tama Techstar Midification)
try out different spaces 4 the buttons -
From the album: TekkStar (Tama Techstar Midification)
Practicly this is what it will look like the black spacers protect diffus lighting and make a spot @ the top of them. @the top will be placed a acrylic glass the whole thing well be cut out as an Rectangel - and will be mounted @the button of the Powersupply-metal, so Frontpanel holes else needet - in theory -well... -
From the album: TekkStar (Tama Techstar Midification)
lets look in the detail --- ah on every side to the Matrix should be Faders to change Kill, VelocityOffset, VCA-Release & maybe Cutoff -
From the album: TekkStar (Tama Techstar Midification)
I had an idea: rotate the the Routing "Trigger-Matrix" 45° & you have a ergonomic UI for your hands! - You better play it like an instrument then - in theory. -
From the album: TekkStar (Tama Techstar Midification)
From Trigger-Bord to standart DINX4 -
From the album: TekkStar (Tama Techstar Midification)
this is short & the hot clue is Chord-Clip! -
From the album: TekkStar (Tama Techstar Midification)
Solder the Trigger-Cable to this Potentiometer cut the the trace - located behind the switch - right to the led - @the top of the PCB. > this because, the unpluged 6,3er socket is switched to ground - and @ ground - no trigger accours... ... it might be a good idea, to cut remove the Plug to get more free space 4 UI! or a big display, or maybe 16 Buttons 4 a sequencer... well i dont know - time will tell -
From the album: TekkStar (Tama Techstar Midification)
the 19" is a nice desktop case 2 -
From the album: TekkStar (Tama Techstar Midification)
the TOM4 Board was way to silent - I replaced the R1 or should that meen RI? (next to Rm) with an 10K Trimpot. Now I Have a Main-Gain - to Level the Voice togehter - to my whises finally i de-soldered the Rm - since i dont want stereo... i noticed when i go mono, i reduce some humm-sound... this because i removed the MIX-Board... i think on the mix board, when you connect only one channel, the other was switched to ground... i guess... and of course, the 10K Trimpot do the job excellent... -
From the album: TekkStar (Tama Techstar Midification)
Well almost all here: lcd for debugging 4Velocity Kill switches --- kill4 Velocity ranges, the red leds below are the toggle leds, the 4 greens indicates in which velocity ranges are most active (you can better choose the kill buttons then!( 2 Buttons under: One: for POWER - ROLL: just take any input notes and trigger it, no matter of Note-Number (momentary) TWo: Invert the Velocity Stages --- so what was loud is now not so loud, what not so loud now loud -
From the album: TekkStar (Tama Techstar Midification)
on th right is also place for a display and menu - when you shorten the powersupply-mount-screw a bit -
From the album: TekkStar (Tama Techstar Midification)
We see under the Powersupply we have 14x36cm Place for UI