Search the Community

Hello guys, I am very new to this whole midibox & c thing. I followed the instructions from this guide until the SVN Repository part. Instead I used the repository from github. I set all environment variables I need and the version check works fine. After finishing the setup part I wanted to compile a dummy project, just to see if it would compile successfully. Unfortunately I am running into an error in the common.mk file on line 143. The error says: "D:\mios32/include/makefile/common.mk:143: *** multiple target patterns. Stop." I tried to look it up but i am unable to find any solution. best regards, arty

Hi all, Please go easy on me, I am new to MIDI and Sammich! I have built a Sammich a few months ago now, and was having problems flashing it, Rowan kindly had a look at it and between him and TK it was fixed (bad optocoupler) Rowan flashed the MIOS and patches for me and I replaced the opto coupler, and bought 2 new SID's as the existing ones were both slightly faulty, now its up and running and the Sammich sounds great triggering the patches from the buttons on it's front panel. Now, here comes the problem: I have wanted to hook it up via MIDI so I can play the patches with a keyboard, which i think should be fairly straight forward based on other MIDI devices I have used. When I hook up the Sammich to my controller keyboard I set it to send on channel 1, I also make sure in the patch on the sammich, in the menu that it is set to also use channel 1, I play the keyboard and nothing happens, I cycle through patches and make sure they are on channel 1 also, but still nothing? I have also hooked the sammich up to fruityloops via a Umidi USB cable (as suggested by the whitelist) and set fruity to output on channel 1, now this does strange things, sometimes the patch will trigger or play randomly or sometimes it causes the sammich to cycle through patches randomly? I have midi out on the keyboard and or fruityloops to midi in on the sammich. I have taken it to a friend who is a bit more knowledgeable with MIDI than me, and he has had a play and thinks there may be an issue with the sammich not properly responding to the midi information, and possibly miss translating what it is receiving. Could this be me just not knowing enough about MIDI, or is there potentially another issue with the sammich that needs correcting, like with the faulty optocoupler? Any help appreciated, and if someone could confirm the best way to make sure it is receiving MIDI and translating it properly that would be great. Thanks, Kai.