jwrigh10 Posted May 5, 2008 Report Share Posted May 5, 2008 I have two modules which work fine for my midio128 project. However, I wanted to enable one of the cores to allow for a volume pedal. I hooked up the pot as instructed; yet, when I tried to upload the appropriate hex file to enable the operation of the volume pedal, I could not get mios studio to upload. I checked all the connections from the interface to the core an the mios studio connections to the interface. I followed the instructions on the Mios studio page concerning uploading with no success.I am running v1.9e so I changed course and tried to upgrade to v 1. 9f but with no luck. I know the core is receiving and sending information via my led lights on the midi interface. Also, I can open Midiox and see that the core is receiving input. When I failed at the upgrade of one of the cores, I tried the other-again, no luck.I am running the latest version of a driver for my midi interface (a Motu 2x2 USB Fastlane) The Midi Interface troubleshooting page talkes about upload the mios in midiox; however, I do not see how you can upload a hex file in midiox. Once again, I can play the instrument with the cores with no problem, but I am having difficulty getting either core to accept a hex file. Any thoughts will be appreciated. Quote Link to comment Share on other sites More sharing options...
doc Posted May 5, 2008 Report Share Posted May 5, 2008 Hi,I am running v1.9e so I changed course and tried to upgrade to v 1. 9f but with no luck. I know the core is receiving and sending information via my led lights on the midi interface. Also, I can open Midiox and see that the core is receiving input. When I failed at the upgrade of one of the cores, I tried the other-again, no luck.What is the sysex String you receive after Power-On the core?Do you run the latest version of MIOSStudio?he Midi Interface troubleshooting page talkes about upload the mios in midiox; however, I do not see how you can upload a hex file in midiox.You'll have to convert the .hex to .syx with the script (convert...)But mostly it is better to use MIOSStudio.Please do the Midi-Troubleshooting guide step-by-step and tell us the result of each step.greetsDoc Quote Link to comment Share on other sites More sharing options...
jwrigh10 Posted May 8, 2008 Author Report Share Posted May 8, 2008 Doc,After more tweaking, I got the hex file uploaded. Thanks for the help and suggestions.Jim W Quote Link to comment Share on other sites More sharing options...
stryd_one Posted May 8, 2008 Report Share Posted May 8, 2008 I don't suppose you'd like to share the answer for everyone else? Quote Link to comment Share on other sites More sharing options...
stryd_one Posted May 8, 2008 Report Share Posted May 8, 2008 I don't suppose you'd like to share the answer for everyone else? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.