Dauwige Posted May 23, 2008 Report Share Posted May 23, 2008 Hi,here is my interface what i'm using to connect my two 2x40 LCD in my MIDIbox.Maybe you can solder one on a small breadboard but if you like more professionality....RegardsCore-LCD2.rarCore-LCD2.rar Quote Link to comment Share on other sites More sharing options...
stryd_one Posted May 24, 2008 Report Share Posted May 24, 2008 Thanks again! Quote Link to comment Share on other sites More sharing options...
julienvoirin Posted June 2, 2008 Report Share Posted June 2, 2008 IMO this PCB is unuseful.You can achieve this by using a 17 wires ribbon cable and 3 HE10 connector.You do the same as IDE ribbon for Harddrive : the only difficulty is to rearrange the wires on the Core connector ( I did it for my SEQ) Quote Link to comment Share on other sites More sharing options...
cimo Posted June 2, 2008 Report Share Posted June 2, 2008 IMO this PCB is unuseful.i don t know of any 2 hours spent in Eagle that could be considered useless ;) Quote Link to comment Share on other sites More sharing options...
stryd_one Posted June 3, 2008 Report Share Posted June 3, 2008 IMO this PCB is unuseful.You can achieve this by using a 17 wires ribbon cable and 3 HE10 connector.You do the same as IDE ribbon for Harddrive : the only difficulty is to rearrange the wires on the Core connector ( I did it for my SEQ)You forgot the 2nd enable line....of course, one could do as you said and cut the enable line to the 2nd connector and run one extra wire. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.