speedyguitar Posted June 9, 2008 Report Share Posted June 9, 2008 first of all: hi everybody and thanks for site , project and everything. I build the "old" floorboard ( http://www.ucapps.de/floorboard.html )and it worked right-out-the-box , first power-on :) I will package it VERY small , so small to stick-it outside a guitar ( or , if i find a no-vintage strat ,i will build INSIDE, I'll post pictures, of course ! ;) ) I would like to make a litlle mod: the program-change button marked "0" it would be better to become the "10" button for some midi hardware so for every banks to have from 1 to 10 and NOT from 0 to 9; is it possible ? I got a look inside the source code and I think I have to modify the "button.inc" file, but I'm not an expert in PIC code :-[ ..( ..not yet , i hope to be in future.. ). Anyway , thanks again everybody for the knowledge and the good quality projects I found here around. Quote Link to comment Share on other sites More sharing options...
stryd_one Posted June 9, 2008 Report Share Posted June 9, 2008 Hmm... I guess that would leave channel 0 inaccessible, right? Quote Link to comment Share on other sites More sharing options...
nILS Posted June 9, 2008 Report Share Posted June 9, 2008 Welcome aboard SpeedyGuitar! ;Dis it possible ? I got a look inside the source code and I think I have to modify the "button.inc" fileYes, definitely possible and yes, "buttons.inc" is the file to modify. I'd suggest you fiddle with it a bit yourself (for the learning and all) and if you run into problems - just ask :-) Quote Link to comment Share on other sites More sharing options...
speedyguitar Posted June 9, 2008 Author Report Share Posted June 9, 2008 thanks all for the quick reply.. :)Hi nILS Podewski , ok I'll try ..hoping to do not make too much errors ( i don't like burnin' PICs .. :) ) I was looking the "button.inc" source and I found the routine to modify, "BUTTON_B5_Pressed" ..but maybe also "BUTTON_B5_Pressed_ok" and "BUTTON_B5_Pressed_ok1 and ..ok2. I would change :BUTTON_B5_Pressed_Ok2 movlw 0x00 ... maybe change "0x00" to "0x0a" ( hex of "10" ) but I suspect that I have to understand exacly how the code works when banks goes up and down AND how exacly manage the display ... The final package could be without display ( I will make it VERY small.. :-) ) and so I could forget 'bout the display for now, but i think it's better to care about the banks .. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.