-
Posts
4,313 -
Joined
-
Last visited
-
Days Won
3
Content Type
Profiles
Forums
Blogs
Gallery
Everything posted by nILS
-
Just a small necro-bump :-) …by now we are roughly 150 people over there with some occasional chatting going on. Feel free to drop by!
-
Well chosen, the day of the 33rd prime! Well done, dear spokesman! The atmosphere is still being slightly tuned, but things are looking good :)
-
100n funktioniert bei mir seit Jahren einwandfrei, was aber niemanden davon abhalten soll, den "richtigen" Kondensator zu nehmen. Der Footprint vom EEPROM ist auf der ersten Variante (weiß) falsch rum. Da ich zur Behebung vermutlich nur den IC gedreht hab und den J4 gleich gelassen hab, werden sich die Leiterbahnen wohl einfach kreuzen. Kann ich - wenn's Dich wirklich brennend interessiert - heute Abend mal nachprüfen. Gruß nILS
-
There will be, no worries :)
-
ArnoNym: Thankees!
-
Hiya Thomasch, I can't help you with the chip, but I have spare PCBs from the last run. Send me a PM if you need any. Cheerio, nILS
-
I edited the thread title accordingly.
-
In case he doesn't - I have spares ;)
-
Well, it wouldn't be much of an easter egg then, now would it? The easter egg is specific to 2 runs of gm5x5x5 PCBs by the way (the red and blue ones). Also, it's really not worth obsessing about ;)
-
sammichSID Bulk Order Run #29/#30 - preorder form online
nILS replied to nILS's topic in Bulk Orders
Should be doable, just sign up and let Wilba know in the "comments" field! Cheerio, nILS -
The problem with the lexan overlays is that the initial setup cost is in the $300-400 range. For a run of 50 units that'll add another $10ish to each sammich. Generally it's doable, but it'll cost extra.
-
sammichSID Bulk Order Run #29/#30 - preorder form online
nILS replied to nILS's topic in Bulk Orders
There seems to be enough interest, because today a carrier pigeon slammed against my office window with a .zip-file attached to its foot. The unzipped message reads: Followed by this link: http://goo.gl/forms/PMKADWL27V Sign up and get your sammichSID soon. -
@rwo: Done.
-
sammichSID Bulk Order Run #29/#30 - preorder form online
nILS replied to nILS's topic in Bulk Orders
Yes. See -
sammichSID Bulk Order Run #29/#30 - preorder form online
nILS replied to nILS's topic in Bulk Orders
Pretty sure, the unicorns will carry him all the way home ;) -
Sure thing.
-
Hiya everyone, there are rumours that Wilba will be coming back from his 2 year meditation on the mountains of Brigantia 5 in the Cartwheel Galaxy, where he trained unicorns in the art of origami. To celebrate his return, there'll be another run of sammichSIDs, given there's enough interest. Consider this thread a waiting list and put yourself down for however many you like. Cheerio, nILS
-
nILS heard rumours that Wilba might come back out hermitism in the outer regions of nothereistan in July. I've been told by ants. http://www.midibox.org/dokuwiki/doku.php?id=sammichfm&#batch_5_preorder-waiting_list
-
You're wrong. QED.
-
I removed the duplicate for you.
-
Hiya! No. Your main noise issues will probably come from the switching regulator which tend to be somewhat noisy (audible hiss and clicks). Cheerio nILS
-
Allgemeine Notiz: Für Versandkosten mach ich das generell immer. Falls jedmand zufällig in meiner Ecke Deutschlands ist gibt's den Service samt Kaffee sogar für lau ;-)
-
Hiya, das klingt mächtig nach RN1, RN3, RN4 falschrum eingelötet. Die müssten einen kleinen Punkt haben, die auf der Seite des Punkts auf dem Bestückungsdruck sein müssen (siehe http://www.schickt.de/mb.org/sammichSID_CS_PCB.pdf). Gruß nILS