SEQ-PAD-Stribe

[ilmenator]

Tease  ;D

Very, very early development stage. The upper part will sport the MB-SEQ. Thanks to moxi for the case!

Best regards, ilmenator

MV-Stribe.JPG

[Smithy]

Ughhhh!

That looks real fun, it will be the envy of lots of boxers!  ;D

I want to play with it right now!

[stryd_one]

Ahh so the MV8k's death will not be in vain :) Good luck illy!

[ilmenator]

Ahh so the MV8k's death will not be in vain :)

Hopefully not!

I know that designing the SEQ frontpanel will probably take me ages (these things always do with me), and I would like to integrate the Button/Duo-LED matrix. Also, the pads will need some coding.

And I notice that the stribes are not quite linear: the LEDs match the touch position quite well in the upper and lower part, but around the middle there is an "offset" of around 2cm. Probably an issue for another thread, once I start working on this.

Best regards, ilmenator