ilmenator Posted June 14, 2008 Report Share Posted June 14, 2008 Tease ;DVery, very early development stage. The upper part will sport the MB-SEQ. Thanks to moxi for the case!Best regards, ilmenatorMV-Stribe.JPG Quote Link to comment Share on other sites More sharing options...
Smithy Posted June 14, 2008 Report Share Posted June 14, 2008 Ughhhh!That looks real fun, it will be the envy of lots of boxers! ;DI want to play with it right now! Quote Link to comment Share on other sites More sharing options...
stryd_one Posted June 14, 2008 Report Share Posted June 14, 2008 Ahh so the MV8k's death will not be in vain :) Good luck illy! Quote Link to comment Share on other sites More sharing options...
ilmenator Posted June 15, 2008 Author Report Share Posted June 15, 2008 Ahh so the MV8k's death will not be in vain :) Hopefully not!I know that designing the SEQ frontpanel will probably take me ages (these things always do with me), and I would like to integrate the Button/Duo-LED matrix. Also, the pads will need some coding. And I notice that the stribes are not quite linear: the LEDs match the touch position quite well in the upper and lower part, but around the middle there is an "offset" of around 2cm. Probably an issue for another thread, once I start working on this.Best regards, ilmenator Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.