Minimum Connections to Make a PIC run

[jeroddumas]

I have built a core on vectorboard a while back.  Since I have it I don't want it to go to waste.  But the problem is the PIC is not running.  I know that it is not the pic because I can put it in my working core and it works.  What are the minimum connections for the PIC to run?  I was thinking it would be Pins 1, 11, 12, 13, 14,31 and 32.  Anyone correct me if I am wrong.

[Sephult]

Hello Jeroddumas.

As for the pins I believe that:

1

11

12

13

14

31

32

Need hooked up like you said &

*

(6 to 1kohm to 5v) (to tell if bankstick is there or not)

(18 to 10k to 5v)(If AIN not used?)

(20 to 10k to 5v)(for the DIN, not & used)

(2-5, 7-10 ground) (If AIN not used)

*

I believe this is all that you need hooked up besides the MIDI pins 25 and 26, I am unsure if you need to hook these up yet to see if the PIC is running.

These pins are the ones that I had and along with the MIDI and it works!

Good luck

-Sephult