tongenerator Posted February 19, 2009 Report Share Posted February 19, 2009 Hello,i would like to upgrade the sequenzer with analog out...i have seen the LC Module wich i could get at mikes pageis easy... what are the diffrence between all those analog outs?can i just controll normaly my doepfer or any other modular Synthwith the LC?thanks for any answer 8) Quote Link to comment Share on other sites More sharing options...
ultra Posted February 19, 2009 Report Share Posted February 19, 2009 i've been looking into the cv out a bit too for my seq. all the info is at ucapps. Quote Link to comment Share on other sites More sharing options...
Modularman Posted February 24, 2009 Report Share Posted February 24, 2009 If you are only wanting to control VCF's and VCA's then the Aout_LC would be fine, however if you are controlling VCO's then zipper noise and resolution may be a problem. You could always run CV output through Doepfer slew module first with a fast slew setting and this would help. My choice would be the Aout _NG, nice quality dac and 8 cv outs (rather than 2cv outs on the Aout_LC), which means you could have independent control of 8 CV Voltages from the MB Sequencer - for example you could control VCO pitch, VCA level, VCF req and VCF resonance all at the same time and still have 4 CV outs spare.Just my 2cents worth 8)Allan Quote Link to comment Share on other sites More sharing options...
tongenerator Posted February 24, 2009 Author Report Share Posted February 24, 2009 thank you Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.