[MB-6582] About Encoders

[Xem]

Hello!

i'm going to build the MB-6582, i have to buy just the encoders.

i found this encoder on ebay:

http://cgi.ebay.it/12mm-Rotary-Encoder-Switch-With-Keyswitch-10pcs_W0QQitemZ370190020165QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item370190020165&_trksid=p3286.c0.m14&_trkparms=72%3A1385|66%3A2|65%3A12|39%3A1|240%3A1318

is this good? i compared the datasheet i think they are very similar, am i right?

[Futureman]

I dunno about those, but if you want to get em via ebay, use these instead

http://cgi.ebay.com.au/12mm-Rotary-Encoder-Switch-Groove-Line-Flat-Top-Knob_W0QQitemZ200330449226QQcmdZViewItemQQptZAU_B_I_Electrical_Test_Equipment?hash=item200330449226&_trksid=p3286.m20.l1116

And, although the shaft is splined, they do come with some nice shiny knobs.

Thats what I used anyway.

Regards

Mike

[Morten]

I think these are a bit pricey compared to the one´s from voti.nl ( http://www.voti.nl/shop/p/SW-ROT-01.html ).. and if i have read the MB-6582 docs right these should be a snug fnit.

[Xem]

but those whit "nice shiny knobs" costs 13 AU$ -> 6.20€, it's soo much!

umh.. voti.nl sell the knobs too.. i did not notice this..

i need the 13 tall switches too, where could i find these?

i found this knobs in an italian shop:

http://www.elettronica-hobby.com/catalog/index.php?cPath=86_39

[stryd_one]

If you edit your first post to use url tags, the link will be clickable.

I'm guessing, but if those are the ones I think they are, they're known to be problematic.

[Xem]

link fixed..

so.. are they problematic?

i'll buy them from voti

[stryd_one]

Thanks ;)

Good news: They aren't the ones I suspected they were

Bad news: those are gigantic knobs!

[Xem]

yep, noticed this..

[Futureman]

Bad news: those are gigantic knobs!

And not very shiny...

Hang on.. aren't they about the same price as the ones I pointed out? At least they come with knobs you can actually use on a MB6582..  :P