theFATman Posted August 11, 2003 Report Share Posted August 11, 2003 I've been over this site a few times now, i just need some detailed information on what parts i need or how i can get a power supply for my midibox64. Sorry if i've missed anything obvious. So far i have all the modules built (except the sil headers are backordered from mouser so i don't have the single row ones) and my JDM is getting decent voltages, 12.9 on the first one.. and dead on for the rest, so i figured i should probly start building a psu and trying to make a case for it all. Quote Link to comment Share on other sites More sharing options...
LO Posted August 11, 2003 Report Share Posted August 11, 2003 just use a plugin wall packBy far the easiest method Quote Link to comment Share on other sites More sharing options...
Guest den_Juin Posted August 11, 2003 Report Share Posted August 11, 2003 you could try a transformer, you would need something like 30:1... Though i recommend you to use a simple walladapter.. Quote Link to comment Share on other sites More sharing options...
Nomical Posted August 11, 2003 Report Share Posted August 11, 2003 If you dislike wall-adapters and would like the same cable/connection as hardware synths/pc's have (what's it called again...IEE-.... i forgot :D ), you could also build a toriodal transformer inside the casing. These don't produce that much heat. Quote Link to comment Share on other sites More sharing options...
theFATman Posted August 12, 2003 Author Report Share Posted August 12, 2003 what voltage/milliamp wall adapter do i need? was it 9v 500ma or is it something else? Thanks much for the help. Quote Link to comment Share on other sites More sharing options...
goyousalukis Posted August 12, 2003 Report Share Posted August 12, 2003 what voltage/milliamp wall adapter do i need? Â was it 9v 500ma or is it something else? Â Thanks much for the help.On the core page, Thorsten recommends:Either the output of a 7V-10V transformer, or a wall adapter can be used. 500 mA is recommented, especially if a backlit display is used,So a 9v 500ma should work great. Quote Link to comment Share on other sites More sharing options...
theFATman Posted August 12, 2003 Author Report Share Posted August 12, 2003 thanks so much for the help, i've been staring at all these pages for so long i must be retarded and missing things. But one things for sure, this midibox is going to kick ass! Now on to designing the panel. Bye for now.-Patrick Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.