Sammich Sid Issue - Issue with 6582s?

[napierzaza]

Hey,

I'm building my Sammich and everything has been checking out. I voltage tested everything, especially the SID hook ups. MIOS loads and I uploaded the Sammich Application.

However, when I plug in the Sids and start up the sammich the LCD does not come on! I'm baffled as to why this could be. The jumber is pinned to the 6582 (5V) and the voltage and ground are checked with a multi-meter. I'm worried there is something wrong with the SIDs.

EDIT: Solved, I needed a better PSU

Edited April 10, 2010 by napierzaza

[phunk]

Just to be clear here. The LCD works fine as long as you have no SIDs plugged in? Probably the used current is to high then...

edit: ah..you solved it...

Edited April 10, 2010 by phunk