bhc303 Posted May 29, 2010 Report Share Posted May 29, 2010 (edited) Hello all, Due to a change in circumstances I will be letting some stuff go. I would like to offer this to the community first, though if I don't get any bites here I would like to ask permission to sell on other forums etc. Local pick up available on gold coast AU, I will post world wide @ buyer expense + pay pal fees Partial 6582 Kit @ AUD $350.00, (will only be sold all together) including... 8 X 6582a SIDZ (purchased from Wilba) 100 diffused blue LED's 15 black and blue albs knobs 6582 CS PCB (purchased from Smash, still sealed) 6582 BASE PCB (purchased from Smash, still sealed) 10p Ribbon Cable, 16p Ribbon Cable 16p IDC Connector LCD plastic screen protector Commodore 64 power supply (AUS) tested by the guy I bought off, I have never tested my self though. stuff sold separately commodore 64 power supply (AUS) AUD $20 tested by the guy I bought off, I have never tested my self though. 2 X 6581 SIDZ new old stock, AUD $30 each (bought from a reputable seller on ebay, had good feedback and sold a heap of sidz) "untested and sold as is, never used" 15 Black Grey albs part # DK16-190V3 A.6/4,5 AT=14 Black soft grey 1677498 AUD $20 15 Black Red Albs part # DK16-190V3 A.6/4,5 AT=14 Black soft red 3092 AUD $20 Think that's the lot for now, I have sold on the forum before and have 100% excellent ebay feedback. cheers Edited June 7, 2010 by bhc303 Quote Link to comment Share on other sites More sharing options...
Wilba Posted May 29, 2010 Report Share Posted May 29, 2010 I will buy the blue knobs if no one wants to buy the lot including the blue knobs. Maybe a buyer would prefer the lot including the red or grey knobs. (I was nicestupid and sold all my spare blue knobs to people over the years since I built the MB-6582 prototype.) BTW to potential buyers, I confirm these are genuine new-old-stock 6582A SIDs from me. Quote Link to comment Share on other sites More sharing options...
bhc303 Posted May 29, 2010 Author Report Share Posted May 29, 2010 cheers wliba, I can do that for you if buyer wants other colored knobs. Quote Link to comment Share on other sites More sharing options...
phunk Posted May 29, 2010 Report Share Posted May 29, 2010 i´d love to take the kit. That is exactly what i was looking for, since it is clear, that my sids from other source probably are lost... pm sent Quote Link to comment Share on other sites More sharing options...
kaleaf Posted May 30, 2010 Report Share Posted May 30, 2010 (edited) I would like the remaining knob set if there is one. Im in the USA so if easier to find a local buyer I would understand. Edited May 30, 2010 by kaleaf Quote Link to comment Share on other sites More sharing options...
bhc303 Posted May 30, 2010 Author Report Share Posted May 30, 2010 (edited) double post... Edited May 30, 2010 by bhc303 Quote Link to comment Share on other sites More sharing options...
bhc303 Posted May 30, 2010 Author Report Share Posted May 30, 2010 that's fine mate, negotiating a sale at the moment for the kit, if he doesn't want those colors (red or grey) which would you like? Quote Link to comment Share on other sites More sharing options...
kaleaf Posted May 30, 2010 Report Share Posted May 30, 2010 I want the grey set if I have a choice. I will still take the red set if he wants the grey. Quote Link to comment Share on other sites More sharing options...
JRock Posted May 30, 2010 Report Share Posted May 30, 2010 Hi. I'd love to buy them 2 loose SIDs. I'll PM you. Quote Link to comment Share on other sites More sharing options...
bhc303 Posted May 30, 2010 Author Report Share Posted May 30, 2010 2 X 6581 sidz on hold... Quote Link to comment Share on other sites More sharing options...
sinewav Posted June 1, 2010 Report Share Posted June 1, 2010 Hey, total n00b here. If those other guys wind up not getting the kit from you, I'd be happy to take it. Color isn't terribly important, but the blue pretty is nice. Quote Link to comment Share on other sites More sharing options...
bhc303 Posted June 1, 2010 Author Report Share Posted June 1, 2010 (edited) Hey Sinewav, just waiting to hear back from phunk... if he doesn't take it its yours! As far as the kits concerned you will have the main parts, sidz, boards, psu ect, though the kit is far from complete, just for piece of mind, not to sure how much you know about the project and my apologies if you do but there is a lot more bits to be collected. cheers mate Edited June 1, 2010 by bhc303 Quote Link to comment Share on other sites More sharing options...
sinewav Posted June 2, 2010 Report Share Posted June 2, 2010 (edited) Truth be told, I don't know that much about the project. I just know that I love the sound of the SID chip and that I've been wanting get into this DIY electronics/MIDI/synth business for a while. I've been reading up on the project, and it seems like it'll be doable, albeit with a bit of a learning curve. Anyway, I figured from the "partial" in the description, that it wasn't going to be everything... but just from looking around, 8x 6582s seem like they're going to be hard-ish to come by. That, and the fact that it comes bundled with a bunch of other necessary stuff saves me the trouble of hunting it all down separately. Edited June 2, 2010 by sinewav Quote Link to comment Share on other sites More sharing options...
bhc303 Posted June 4, 2010 Author Report Share Posted June 4, 2010 hey sine, sorry for late reply, been a busy week, I haven't herd back from phunk & I don't think he wants it due to post costs. If your still interested, its yours. cheers Quote Link to comment Share on other sites More sharing options...
yolbitt Posted June 4, 2010 Report Share Posted June 4, 2010 PM sent :) Quote Link to comment Share on other sites More sharing options...
sinewav Posted June 5, 2010 Report Share Posted June 5, 2010 (edited) I'm definitely still interested. What do you need from me? And out of curiosity, how bad is that postage? Edited June 5, 2010 by sinewav Quote Link to comment Share on other sites More sharing options...
bhc303 Posted June 7, 2010 Author Report Share Posted June 7, 2010 (edited) I need to get the ball roiling, sorry wilba I will have to sell the kit as is... kit is on hold for sinewav. Grey set of knobs goes to kaleaf Red set of knobs goes to yolbitt 2 X 6581 sidz are on hold for JRock, I need to know soon if you want them as I have an offer from Janis1279 PSU / PSU'S available, make me an offer PM's sent Edited June 7, 2010 by bhc303 Quote Link to comment Share on other sites More sharing options...
tom woxom Posted June 7, 2010 Report Share Posted June 7, 2010 Partial 6582 Kit @ AUD $350.00, (will only be sold all together) including... 8 X 6582a SIDZ (purchased from Wilba) 100 diffused blue LED's 15 black and blue albs knobs 6582 CS PCB (purchased from Smash, still sealed) 6582 BASE PCB (purchased from Smash, still sealed) 10p Ribbon Cable, 16p Ribbon Cable 16p IDC Connector LCD plastic screen protector Commodore 64 power supply (AUS) tested by the guy I bought off, I have never tested my self though. I'm interessted in the complete kit, excluding the C64 power supply (AUS). Contact would be great at tomwoxom@googlemail.com tom Quote Link to comment Share on other sites More sharing options...
bhc303 Posted June 9, 2010 Author Report Share Posted June 9, 2010 Hey tom, just waiting to hear back from sinwave, will keep you in the loop... Quote Link to comment Share on other sites More sharing options...
bhc303 Posted June 10, 2010 Author Report Share Posted June 10, 2010 (edited) 6582 KIT = SOLD "POSTED" 2 X 6581 SIDZ = SOLD "POSTED" ALPS Grey knobs = SOLD "POSTED" ALPS Red knobs = SOLD 2 X commodore 64 AUS PSU's avalible EDIT = POSTED Edited June 13, 2010 by bhc303 Quote Link to comment Share on other sites More sharing options...
sinewav Posted June 17, 2010 Report Share Posted June 17, 2010 Just got the kit in the mail. That was pretty fast for something coming from Australia! Everything looks to be in order. Thanks, dude! Quote Link to comment Share on other sites More sharing options...
bhc303 Posted June 17, 2010 Author Report Share Posted June 17, 2010 Hey mate, happy to hear your pleased! good luck with the build mate! cheers Quote Link to comment Share on other sites More sharing options...
kaleaf Posted June 18, 2010 Report Share Posted June 18, 2010 (edited) Got my knobs ... Thanks bhc303 Edited June 18, 2010 by kaleaf Quote Link to comment Share on other sites More sharing options...
Janis1279 Posted June 25, 2010 Report Share Posted June 25, 2010 cheers, bhc303 Today I got my 2 x Mos 6581 chips. And both of its are look fine ! Thank you very much ! Best Regards, Janis Quote Link to comment Share on other sites More sharing options...
bhc303 Posted June 25, 2010 Author Report Share Posted June 25, 2010 Hey Janis, no worries mate! Pleased you are happy with them! cheers Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.