nuke Posted September 15, 2010 Report Share Posted September 15, 2010 i´m currently building a new seqboard for my mb808...on my testboard i added few more buttons on for copy/paste/clear track and copy/paste/clear steps...so it´s six more buttons... in the setup_808_default.asm i call the functions with: DIN_ENTRY CS_M_UTILS_CopyTrack, 2, 3 DIN_ENTRY CS_M_UTILS_PasteTrack, 2, 4 DIN_ENTRY CS_M_UTILS_ClearTrack, 2, 1 DIN_ENTRY CS_M_UTILS_CopySteps, 1, 5 DIN_ENTRY CS_M_UTILS_PasteSteps, 1, 6 DIN_ENTRY CS_M_UTILS_ClearSteps, 1, 7 ...so i does work somehow...although the copy/paste/clear steps is not working as i thought it would be... copy/paste/clear track is working fine, while the machine runs i can copy tracks...but copy/paste/clear steps is only working when i stop the machine...is there another way to call the function so that it will also work when it´s running? but better would be, instead of adding six buttons, to have only 3 buttons more with a shift function...so while holding shift it copies steps and without shift it´s copying tracks...is that possible somehow? Quote Link to comment Share on other sites More sharing options...
TK. Posted September 15, 2010 Report Share Posted September 15, 2010 it cannot work properly this way, dedicated button handling functions have to be created. this would also allow to consider the shift button. if the examples under seq_buttons.inc don't help, you have to wait until i'm back from vagation. best regards, thorsten. Quote Link to comment Share on other sites More sharing options...
nuke Posted September 16, 2010 Author Report Share Posted September 16, 2010 so...what i did now is putting this code in the seq_buttons.inc ...or its more a "copy some lines and paste them elsewhere" ...cause its really hard for me to understand asm, as i didn´t do anything before like coding and such things...so its pretty a learning by trial an error... ;) so here is what i did: SEQ_BUTTON_COPYTRACK call CS_M_HLP_GetSelectedTrk movff WREG, SEQ_EVNTT call CS_M_UTILS_CopyTrack rgoto SEQ_BUTTON_CPC_Cont SEQ_BUTTON_PASTETRACK call CS_M_HLP_GetSelectedTrk movff WREG, SEQ_EVNTT call CS_M_UTILS_PasteTrack rgoto SEQ_BUTTON_CPC_Cont SEQ_BUTTON_CLEARTRACK call CS_M_HLP_GetSelectedTrk movff WREG, SEQ_EVNTT call CS_M_UTILS_ClearTrack rgoto SEQ_BUTTON_CPC_Cont SEQ_BUTTON_COPYSTEPS call CS_M_UTILS_CopySteps rgoto SEQ_BUTTON_CPC_Cont SEQ_BUTTON_PASTESTEPS call CS_M_UTILS_PasteSteps rgoto SEQ_BUTTON_CPC_Cont SEQ_BUTTON_CLEARSTEPS call CS_M_UTILS_ClearSteps rgoto SEQ_BUTTON_CPC_Cont SEQ_BUTTON_CPC_Cont call CS_M_UTILS_UpdateGPLEDs bsf CS_STAT, CS_STAT_DISPLAY_UPDATE_REQ return SEQ_BUTTON_F4 SET_BSR SEQ_BASE BRA_IFSET SEQ_MODE1, SEQ_MODE1_SHIFT, BANKED, SEQ_BUTTON_COPYTRACK ;; do nothing when button has been released btfsc MIOS_PARAMETER2, 0 return goto SEQ_BUTTON_COPYSTEPS return SEQ_BUTTON_F5 SET_BSR SEQ_BASE ;; if shift button pressed: start/stop record mode BRA_IFSET SEQ_MODE1, SEQ_MODE1_SHIFT, BANKED, SEQ_BUTTON_PASTETRACK ;; do nothing when button has been released btfsc MIOS_PARAMETER2, 0 return goto SEQ_BUTTON_PASTESTEPS return SEQ_BUTTON_F6 SET_BSR SEQ_BASE ;; if shift button pressed: start/stop record mode BRA_IFSET SEQ_MODE1, SEQ_MODE1_SHIFT, BANKED, SEQ_BUTTON_CLEARTRACK ;; do nothing when button has been released btfsc MIOS_PARAMETER2, 0 return goto SEQ_BUTTON_CLEARSTEPS return for now its works while running also with the shift function...yippie...but the only limitation is, the stepcopy just works in one part like only A or only in B...but cannont copy steps from A to B as it seems to clear the buffer when changing to another part...puh...will be a next hard night fiddling around...but it starts to make fun somehow...hehe otherwise i have to wait ´till you´re back from holiday and have some sparetime left. ;) anyway...wishing you a nice vacation, thorsten Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.