Installation problems for mios midibox 64

[damiano]

Hello everyone

sorry for my bad English, if you do not understand something,

Please tell me.

I bought a kit for midibox64, complete with PIC18F (pic based

core) on the shop by mike (all perfect .... shop recommended)

I can not install the mios on pic.

I downloaded mios studio2, now what do I do??

I tried to download from the application of the complete

midibox64

I loaded on my pc, the file mios Studio 2: Setup_midibox64.hex

I launched the start, to put it above the

pic, the fact that, as the guide says, should appear on the

LCD screen of the core, the written copyrght.

but to me it is empty, the mios studio me says:

"Operating system: mios8

board: MBHP_CORE or similar

core family: PIC18F

bootloader is up & running!"

please tell me what to do!

thanks damiano

[Janis1279]

Hello,

In the HOWTOs part you can find and read :

MIDI Interface Troubleshooting Guide

May be you need at first to see your core midi input part: socket soldering places, optocoupler's direction on the 8-pin socket, etc.

Regards,

Janis

[damiano]

i don't understand, where is the: "HOWTOS part"???

thanks!

[philetaylor]

http://www.ucapps.de/howto_debug_midi.html

Cheers

Phil

[damiano]

hello guys, I've done all that is written in how to ....... the core seems to respond well.

my problem is I do not understand what application

loaded into the core to make a midibox64??

in my pic is just the bootloader.

I can explain step by step. From what is written on the site, I

I can not understand ...

please explain to me!

thanks

[Janis1279]

hello guys, I've done all that is written in how to ....... the core seems to respond well.

my problem is I do not understand what application

loaded into the core to make a midibox64??

in my pic is just the bootloader.

I can explain step by step. From what is written on the site, I

I can not understand ...

please explain to me!

thanks

Hello,

from your earlier post:

...

"I wanted to create a MIDI interface on the basis of midibox 64, which serves to draw the scene for my

management software lights

I serve the switches that trigger midi notes, at most 50. I would use the switches

momentary, but the function is a implemetare aceensione static, I'll explain:

When I press a switch (momentary), the note to go on, I press a second time and back off the note.

Obviously these switches must be related to LEDs, been displayed to the state of the note!

.... This thing can be implemented simply by software? or do I use the flip flop

configured as a bistable multivibrator, in order to perform the on-off!

and then I will require an additional 10/12 momentary switches, which perform the function of momentary on-off notes, I

explain:

I press the switch, the note is on, leave the switch and the note to be off.

third requirement.

I manage, 12/15 against change, from flying to the value 0 127.

then 4 / 5 of these, I would manage with rotary encoders, with dedicated LEDrings. and if possible other via potentiometers."

...

I thinking, you need upload the midibox 64e application:

http://ucapps.de/mio...ox64e_v2_2d.zip

Regards,

Janis