RowanHall Posted February 16, 2011 Report Posted February 16, 2011 Hi, I have recently began to complete my sid project, after a six year break. My midibox knowledge has began to get a bit hazy! It is currently fully working up to step B, and have decided to finish the control surface. I was wondering if there were any hardware mods required bringing the software to most recent V1 standard? (V1.7303e) The machine currently has MIOS 1.8 installed, and SID 1.7a. Rowan Quote
nILS Posted February 16, 2011 Report Posted February 16, 2011 No mods are needed for a 1.7a -> 1.7303e upgrade. Quote
RowanHall Posted February 17, 2011 Author Report Posted February 17, 2011 Thanks again, i'll go ahead and update mios to 1.9g, then sid to 1.7303e. i had read about removing the oscillators from the sid modules, so i'll do this too, for completeness. Rowan Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.