jmayes Posted March 22, 2011 Report Share Posted March 22, 2011 Ok, I have read until my eyes bleed. Lets go back a few steps, I have built and adapted many MDIO128's now using MDIO studio there was no need for a LCD but now I plan on doing a Midibox64 which says it can use a LCD for configuration, I have the LCD working but exactly where the NAV buttons connect is alluding me. Seems like the MIOS would define this but I keep finding bits and pieces that it could be app specific. I know the Midibox64 project also can use a DIN board, do the nav buttons hook there and if so, which pins? Thankx for any insight someone can offer, Jmayes Quote Link to comment Share on other sites More sharing options...
ssp Posted March 22, 2011 Report Share Posted March 22, 2011 the mb64 and mb64e nav buttons connect to the first 8 pin header on a dinx4 board or you can also make a single dinx1. you can also change two buttons for an encoder for data up and down values, this makes going through things a little faster also. hope that helps Quote Link to comment Share on other sites More sharing options...
jmayes Posted March 22, 2011 Author Report Share Posted March 22, 2011 Thank you SSP! Jmayes Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.