SEQ V4 Transport LEDs

[gtxdude]

My newly built SEQ v4 has an annoying problem. All 5 of the LEDs above the transport controls stay lit constantly regardless of play, pause, stop, etc... I have taken the unit back apart and examined the core, the cabling and the control surface with a microscope and see nothing wrong. I apologize if i am being thick here, but i just don't see any reason for this behavior. Is this most likely a build/hardware issue or software issue (running V.4.Beta24 3.5.65) A search here and at uCApps turned up nothing.

Any help would be appreciated. Thanks!!

[gomiboy99]

Check the LED assignments in the Hardware file on the SD card. Ensure that the LEDs are assigned to the correct shift registers.

Hope this helps

Tim.