MB808 - which resistors on triggers

[Antix]

Hi,

I am going to use ( read "to experiment" ) MB808 sequencer with the TR808 clone voice board ( from Microlarge )

The trigger output on the SR have to be connected to the trigger input of the voice board throug 100/220 ohm resistors ?

or can be wired directly w/o any resistor?

( in effect the ask is for any instrument trigger input that can be driven from MB808 )

Thanks for any helpful information

Regards

Antix

[nuke]

no problem with a 100 Ohm resistor here...works fine...220 would work also, but i prefer the 100s ;)

[Antix]

Tnx! :smile: