Antix Posted May 18, 2011 Report Share Posted May 18, 2011 Hi, I am going to use ( read "to experiment" ) MB808 sequencer with the TR808 clone voice board ( from Microlarge ) The trigger output on the SR have to be connected to the trigger input of the voice board throug 100/220 ohm resistors ? or can be wired directly w/o any resistor? ( in effect the ask is for any instrument trigger input that can be driven from MB808 ) Thanks for any helpful information Regards Antix Quote Link to comment Share on other sites More sharing options...
nuke Posted May 20, 2011 Report Share Posted May 20, 2011 no problem with a 100 Ohm resistor here...works fine...220 would work also, but i prefer the 100s ;) Quote Link to comment Share on other sites More sharing options...
Antix Posted May 25, 2011 Author Report Share Posted May 25, 2011 Tnx! :smile: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.