MB-6582 modulation matrix problem

[kogz23]

Hello all,

I am testing an MB-6582 with a home brew control surface.

The problem I have is with the mod matrix. When selecting a source and target the leds work correctly as does the actual routing. The problem is that the target is not updated in the LCD. It stays with ---. The source is updated though as is the actual routing and led behaviour. So I'm confused.

Any ideas?

Cheers

Al

[TK.]

hi,

thats the expected behaviour. the displayed target is an additional destination for the routing path, such as LFO depth/rate, CV, MODs, etc...

They can be optionally selected with the rotary encoder.

best regards, thorsten.

[kogz23]

Oh, doh!