monokinetic Posted December 2, 2011 Report Share Posted December 2, 2011 Hello all, I think I may have found a problem with transmitting SysEx using MBSeqV4. I'm running version 4.054. I have the MBSeq set up to use the router function to send MIDI from USB1 > OUT1 and IN1 > USB1, because I wanted to send SysEx from my Mac to my MB FM while using the MBSeq but I just couldn't get the SysEx to work. So decided to monitor the SysEx coming out of the MBSeq and compare it to what my other MIDI interface - a MIDISPORT2x2 - sends. Here's the results: with MIDISPORT OUT A connected back to MIDISPORT IN A = [MIDI OUT][13:10:17:000042]: [MIDISPORT 2x2 Port A][f0 00 00 7e 49 00 06 08 00 1c 01 f7] [MIDI IN ][13:10:17:000052]: [MIDISPORT 2x2 Port A][f0 00 00 7e 49 00 06 08 00 1c 01 f7] with MBSeq OUT 1 connected to MIDISPORT IN A = [MIDI OUT][13:08:49:000819]: [MIDIbox SEQ V4 Port 1][f0 00 00 7e 49 00 06 08 00 1c 02 f7] [MIDI IN ][13:08:49:000833]: [MIDISPORT 2x2 Port A][f0 00 00 7e 49 00 7e 49 00 06 08 00 06 08 00 1c 02 f7] [MIDI IN ][13:08:49:000834]: [MIDISPORT 2x2 Port A][f0 1c 02 f7] I've tried this test with 2 different pieces of software now (Cubase 6 and Ctrlr v5), exactly the same behaviour. My guess is that something is wrong here. Any ideas? David Quote Link to comment Share on other sites More sharing options...
TK. Posted December 11, 2011 Report Share Posted December 11, 2011 Hi David, I remember that I had similar SysEx issues with my MIDIsport2x2 on a Mac back in January. They vanished after I used a GM5 based MIDI interface instead - haven't used the MIDIsport2x2 anymore... It was working very reliable under Win98 and WinXP years ago, but it seems that the Mac driver is buggy. MBFM SysEx transfers via MBSEQ: you have to assign a different device ID either to MBFM or MBSEQ. Best Regards, Thorsten. Quote Link to comment Share on other sites More sharing options...
igi Posted December 16, 2011 Report Share Posted December 16, 2011 Hi! I also have a problem with sending sysex thru MBseq V4 4.054. Router: IN:USB Ch1. OUT:out4(any) ch.1 On MIDI monitor is show incoming SYSex, but on out port only on start and stop sysex massage is shown. I try use C6 and PCto550, but all the same. I have no problems sending sysex directly without MB SEQ V4. I'm using PC with win XP. Thanks and Best regards, IGI Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.