16slice Posted April 1, 2012 Report Share Posted April 1, 2012 Hi, I have a MPC2000 and I would like to make a router for Channels MIDI. I would want one button by channel. Thus 16 buttons of selection (with a led temoin why not). Do you think that it is possible? I nothing is not seen similar in store... Thanks I am French, I write here with has a translator, excuse me if my sentences are strange Quote Link to comment Share on other sites More sharing options...
gomiboy99 Posted April 1, 2012 Report Share Posted April 1, 2012 Hi, yes it is possible. You will need to make a customised version of the Midi Router. Look here. Regards Tim. Quote Link to comment Share on other sites More sharing options...
16slice Posted April 1, 2012 Author Report Share Posted April 1, 2012 Thank you for the link. I also saw this: http://www.midibox.org/dokuwiki/doku.php?id=home:project:midi_mapper I think that it corresponds has what I wants to make, no? I am going to look at the best module for the construction. Quote Link to comment Share on other sites More sharing options...
gomiboy99 Posted April 1, 2012 Report Share Posted April 1, 2012 I also saw this: http://www.midibox.org/dokuwiki/doku.php?id=home:project:midi_mapper I think that it corresponds has what I wants to make, no? I have not seen the midi_mapper before. Yes it would do exactly what you need. Tim.. Quote Link to comment Share on other sites More sharing options...
16slice Posted April 2, 2012 Author Report Share Posted April 2, 2012 Yes it is good, the project / Tutorial is a little bit old, you think that with a core LPC17 there will be no problem? I think that ok Quote Link to comment Share on other sites More sharing options...
gomiboy99 Posted April 2, 2012 Report Share Posted April 2, 2012 The project is designed using a PIC core, the firmware will not work with the LPC17. To use the LPC17 the firmware will need to be changed from MIOS8 to MIOS32 as the LPC17 is 32bit. Do not worry about the age of the project, it will still work if you use the correct hardware. Tim.. Quote Link to comment Share on other sites More sharing options...
16slice Posted April 2, 2012 Author Report Share Posted April 2, 2012 OK, it is my 1st project. It is the 1st stage of the construction of a Daw controler, The LPC17 cannot support 1 MIDI Mapper et 1 MIDI box ? To separate shall be both one better logical? (And what in the end they shall be in the same casing) Quote Link to comment Share on other sites More sharing options...
gomiboy99 Posted April 3, 2012 Report Share Posted April 3, 2012 The LPC17 is programmed with 1 application at a time, no multi-tasking. You could write the application to include the midi mapper function. Check the wiki for details of writing applications. Quote Link to comment Share on other sites More sharing options...
16slice Posted April 3, 2012 Author Report Share Posted April 3, 2012 Ok Thank you. I am going to follow Tutorial, will have less complicated. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.