pilot40 Posted April 5, 2012 Report Share Posted April 5, 2012 Hi all, I'm not sure if I've posted to the right forum, but I'd appreciate any advice. I've just started to get an interest in the Seq4 and would like to build one. After browsing through the Midibox site it seems there are several options to building one and I'm a little confused. What modules do I need to build, I've built an edrum recently, so I'm quite happy and confident in building as much of the seq myself including etching PCB's. Any help and advice would be appreciated, as I'm little lost as to where to start at the moment. Quote Link to comment Share on other sites More sharing options...
damnit Posted April 5, 2012 Report Share Posted April 5, 2012 Hello, As you can read under SEQV4 documentation, it needs an LPC17 core module + some DIN & DOUT modules to control it ! Quote Link to comment Share on other sites More sharing options...
Hawkeye Posted April 5, 2012 Report Share Posted April 5, 2012 Hi and welcome! if you want to go full DIY (there is a nice control surface board available from SmashTV which can save you a lot of time), here is a small photo tutorial, but it is quite some work :) Greets! Peter Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.