basta73 Posted October 2, 2003 Posted October 2, 2003 So,If your motorfaders are not touch sensitive, you can use a switch to interrupt the motors, and allow you to make adjustments without damaging the faders...Must you use 1 switch per fader, or does 1 switch turn off all faders' motors simultaneously?Has anyone tried using a footswitch to trigger this? It seems this would be the least intrusive way to handle non-touch-sensitive boards.
pay_c Posted October 2, 2003 Posted October 2, 2003 The touchsensitivity is there to stop the motor and let you move it to other postitions (so you can do that in the middle of a recording and delete the old automation).Because of that: There's one switch for each Fader (otherwise it would be stupid - you never would be able to only stop one fader).Instead of a footswitch you also can only use a small metall plate to induce touchsensitivity (just touch the metall plate and simultaniously move the fader).I wouldn´t recommend 8 foot switches under your table... ;)
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now