goyousalukis Posted October 13, 2003 Report Posted October 13, 2003 Hey I have a question. I only have one DOUT module for my Sid step C. I want to use this for the modulation matrix. I see in the cs_menu_io_tables.inc where I can change the pin assignments for the other LEDs, but the mod matrix isn't there. I checked the cs_menu_matrix.inc file, but I don't see any obvious (to me) places to change this. I want to change the matrix from Shift Register 7&8 to Shift Register 3&4. Can anyone help?justin Quote
DriftZ Posted October 13, 2003 Report Posted October 13, 2003 In the main.asm I found the following initialisation:;; set this to '1' if the modulation matrix (8x7 LEDs) is connected to the DOUT chain #define MOD_MATRIX_ENABLE Â Â Â 1 Â Â Â ;; define the shift registers (note: HERE the shift register begin with 0: 1st SR is 0, 2nd is 1, 3rd is 2, ...) #define MOD_MATRIX_ANODES Â Â Â 6 Â Â Â ; shift register with anodes (HERE: 7th shift register in the chain) #define MOD_MATRIX_CATHODES Â Â Â 7 Â Â Â ; shift register with cathodes (HERE: 8th shift register in the chain) Note: dont forget to modify also the regular outputs (the ones you gonna put the matrix on)b regards Quote
goyousalukis Posted October 13, 2003 Author Report Posted October 13, 2003 Thanks Driftz! I didn't catch that. I'll try it tonight.Justin Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.