MB808 Changing switch and led mapping

[zephyrin]

Hello i wanted to change the switch and led mapping.

I have see the notes in the setup_808_default.asm file and i supposed that i will make the change in thi file.

So i think i need to build a new HEX file after make the change ?

If yes how i can do this ?

[TK.]

Hi,

here is a guide for Windows users: http://www.midibox.org/dokuwiki/doku.php?id=windows_toolchain_quickstart

Best Regards, Thorsten.

[zephyrin]

Thank you, i have change the mapping for the switches and it's work.

[zephyrin]

I have try to make the 16 led (GP L and R ) but they are always all on, it is normal ?

[TK.]

It depends on the selected page, e.g. in edit page they would be always on if all triggers are selected.

Or are the LEDs enabled regardless of the selected page?

Do you see some activity when the sequencer is playing?

Best Regards, Thorsten.

[zephyrin]

The LEDs are enabled regardless of the selected page. I have build the A B C D Led and is the same.

For information i haven't build the bankstick. I use the setup_808_default, i have just changhe the DIN section for remapping the switches.

The Switches work well.

I m supposing that i have activity when the sequencer playing because i see the date in the MIOS Studio, the data stop if i m sopping the sequencer with stop switch. But the LED don't change...

[zephyrin]

I have resolve the probleme, i was a trouble with dupond connector ...

For the final, i think that i will soldering cable on the DIN and Dout model for minimize Dupont connector.