Jump to content

MBFM Wavetable Issues


sebiiksbcs

Recommended Posts

Hey, I recently upgraded to v1.4e from v1.1. I used a PIC18F4620 I had lying around instead of the recommended PIC18F4685, and so far everything works just as well.

 

Only the Wavetable sequencer seems to be broken. I can access and edit it in the menu, but it doesn't seem to have any effect. Could it be because I am using a PIC18F4620?

 

 

Is anybody else using a an 18F4620? Any ideas?

Edited by Akcija
Link to comment
Share on other sites

I never tried it with a PIC18F4620 by myself.

 

Which setup file are you using?

It would be especially helpful to know, if the WAVETABLES_IN_RAM switch is enabled or not, and how it works if you take the inverted value.

 

Best Regards, Thorsten.

Link to comment
Share on other sites

I'm using setup_pic18f4685_mbfm_v1.asm with settings adjusted to my hardware.

 

 

I left all 4685-ish settings standard, which means WAVETABLES_IN_RAM is on, and also USE_SHADOW_BUFFERS and DISPLAY_CC_ASSIGNMENT_NAMES.... I'll try it with some of these settings off. Good idea!

 

 

 

Interesting. When I set WAVETABLES_IN_RAM to 0, I get the following error during the build:

 

./src\mbfm_rnd.inc:410:Error [179] Unknown opcode "MBFM_RND_GenerateWTE_Loop"
./src\macros.h:15:Error [113] Symbol not previously defined (MBFM_RND_GenerateWT
E_Loop).
./src\macros.h:15:Error [126] Argument out of range (-16377 not between -1024 an
d 1023)

make: *** [setup_pic18f4685_mbfm_v1.hex] Error 1

 

Does that mean the random generator needs WAVETABLES_IN_RAM to be on?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...