John E. Finster Posted August 15, 2013 Report Share Posted August 15, 2013 Hi, can anyone tell me if it is possible to send/receive a 10bit pitchbend event via encoder? I want to emulate a fader, that uses this. The event has the form of "E9 xx yy" while xx refers to 3 LSBs and yy to 7 MSBs. In Midiox it looks like this 0BAF24F 1 -- E0 42 00 1 --- Pitch Bend 0BAF287 1 -- E0 03 01 1 --- Pitch Bend 0BAF2AF 1 -- E0 45 01 1 --- Pitch Bend 0BAF2EF 1 -- E0 06 02 1 --- Pitch Bend 0BAF30F 1 -- E0 48 02 1 --- Pitch Bend 0BAF31F 1 -- E0 09 03 1 --- Pitch Bend 0BAF33F 1 -- E0 4B 03 1 --- Pitch Bend 0BAF367 1 -- E0 0C 04 1 --- Pitch Bend 0BAF397 1 -- E0 4E 04 1 --- Pitch Bend 0BAF3A7 1 -- E0 0F 05 1 --- Pitch Bend 0BAF3D7 1 -- E0 51 05 1 --- Pitch Bend 0BAF3E7 1 -- E0 12 06 1 --- Pitch Bend 0BAF407 1 -- E0 54 06 1 --- Pitch Bend 0BAF41F 1 -- E0 15 07 1 --- Pitch Bend 0BAF447 1 -- E0 57 07 1 --- Pitch Bend 0BAF45F 1 -- E0 19 08 1 --- Pitch Bend 0BAF487 1 -- E0 5A 08 1 --- Pitch Bend 0BAF49F 1 -- E0 1C 09 1 --- Pitch Bend 0BAF4BF 1 -- E0 5D 09 1 --- Pitch Bend 0BAF4F8 1 -- E0 1F 0A 1 --- Pitch Bend 0BAF518 1 -- E0 60 0A 1 --- Pitch Bend 0BAF520 1 -- E0 22 0B 1 --- Pitch Bend 0BAF550 1 -- E0 63 0B 1 --- Pitch Bend 0BAF568 1 -- E0 25 0C 1 --- Pitch Bend 0BAF588 1 -- E0 66 0C 1 --- Pitch Bend 0BAF5A0 1 -- E0 28 0D 1 --- Pitch Bend 0BAF5C0 1 -- E0 69 0D 1 --- Pitch Bend 0BAF5D7 1 -- E0 2B 0E 1 --- Pitch Bend 0BAF600 1 -- E0 6C 0E 1 --- Pitch Bend 0BAF618 1 -- E0 2E 0F 1 --- Pitch Bend 0BAF647 1 -- E0 6F 0F 1 --- Pitch Bend 0BAF667 1 -- E0 31 10 1 --- Pitch Bend 0BAF697 1 -- E0 73 10 1 --- Pitch Bend .......... when I drag the fader up. Thanks. my regards Quote Link to comment Share on other sites More sharing options...
TK. Posted August 15, 2013 Report Share Posted August 15, 2013 Hi, (note that I've no time to give explicit help till September) it looks like the pitchbender sending routine expects either a 7bit (range 0:127), or a 14bit value (range 0:16383). Other value ranges are not properly handled. I could change this sooner or later, but until then please use a 14bit value range. (crossing my fingers, that this one is working - currently I can't test it...) Best Regards, Thorsten. Quote Link to comment Share on other sites More sharing options...
John E. Finster Posted August 15, 2013 Author Report Share Posted August 15, 2013 Hi TK, a pitchbend event with a 14bit value works, but only in one direction. I can control the value (volume fader in daw) with no value jumps, the encoder somehow "picks up" the value when I´m moving it, but it doesn´t get updated, while I move the fader inside the daw. But that´s alright for now. This is a little side project, I´m working on, while I´m away from my main project. I´m with my folks for 2 weeks and I was only allowed to take my SEQ4 with me (strict orders from my wife :wink: ). So I thought I could work an some other ideas. Many thanks for your advice. My regards Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.