DataWheel Midibox64

[production]

Hello, sorry for my English is not only a google translation of my french
 

Well, I'm on the end of a MIDIbox64 for Hammond clone, but I do not understand how (despite the explanations I could Rescueing) replace the navigation buttons by datawheel in the program. I need help.

 

Thank you in advance to all

[TK.]

It requires some changes in setup_midibox64.asm and mios_tables.inc (as described in the files), but I must admit, that the change isn't straightforward... in addition you've to install the MIOS toolchain to recompile the application.

Anyhow, I could change the setup for you and give you a .hex file... Next week after my holidays.

Best Regards, Thorsten.

[production]

it will be super nice of you, thank you. And I await your return from holiday with impatience.

[TK.]

Finally a preconfigured firmware where the left/right button can be replaced by an encoder:

http://www.ucapps.de/mios/midibox64_v2_4f_with_datawheel.zip

 

DIN Assignments:

EXIT button at D7

SNAPSHOT button at D6

Encoder at D4/D5

 

Best Regards, Thorsten.

[k-rAd MB6401]

wow i could have used that a long time ago. just figuring out the encoder thing now and i built my box more than 6 years ago.  ;)

I'm going to have to modify it a bit and add that one encoder for up and down scene selection in ableton.