tonedef Posted December 1, 2013 Report Share Posted December 1, 2013 Ok. Thanks to TK, I've got everything running. My core shows up in MIOS Studio, uploading .hex files works, encoders on my DIN's transmit, and my AINSER64 looks like it's working when I upload the MIDIO128 project (albeit, missing a few pots I've not attached yet). However, when I upload the NG project, my little green LED doesn't light up at all, and nothing happens when I spin any of the pots, so it doesn't look like the AINSER64 board is being recognized. Do I need to do some programming at this point? Totally cool to dive into this, but I wanted to make sure I'm not missing something, like, the NG should see the AINSER64 board, but I've foobared it somehow. Any hints are much appreciated... thx! Quote Link to comment Share on other sites More sharing options...
TK. Posted December 1, 2013 Report Share Posted December 1, 2013 Yes, you have to enable the AINSER module (especially you've to specify the CS pin number). Here a configuration example for two AINSER modules (you only need the first one): http://svnmios.midibox.org/filedetails.php?repname=svn.mios32&path=%2Ftrunk%2Fapps%2Fcontrollers%2Fmidibox_ng_v1%2Fcfg%2Ftests%2Fainser64.ngc Best Regards, Thorsten. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.