alchemist Posted December 10, 2013 Report Share Posted December 10, 2013 (edited) Hello, I am soldering a PIC-based core module and a SID module. The PIC has the MIOS bootstrap. Then I will upload the OS. I have a question: what happens if the upload fails? Can I upload the OS again without problem? I would be sure not to brick my first MIDIbox project, so I need to be sure everything will be OK :smile: Edited December 10, 2013 by alchemist Quote Link to comment Share on other sites More sharing options...
TK. Posted December 10, 2013 Report Share Posted December 10, 2013 Yes, you can: power-off the core, press the START button in MIOS Studio, power-on the core -> the core will send an upload request and the application will be uploaded with the 1st level bootloader (which can't be overwritten) Best Regards, Thorsten. Quote Link to comment Share on other sites More sharing options...
alchemist Posted December 10, 2013 Author Report Share Posted December 10, 2013 OK, that's perfect ! It's as robust as my Arduino platform :smile: MBHP_CORE is soldered. Tomorrow, I solder the pins and power cable, and will test it ;) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.