Jump to content

SID PSU


Florestan

Recommended Posts

Didn't find anything with keyword "PSU" in the forum, so maybe I'm the most birdbrained guy around.

 

So what, please type slowly... ;)

 

This is my first (bigger) soldering project and I already finished the core and I'm working on the SIDmodule. To check voltages I need to connect it to the PSU, therefor I bought an original C=64 power supply. This is  where I am at a loss:

 

http://www.ucapps.de/mbhp/mbhp_8xsid_c64_psu_optimized.pdf

 

Is there any circuit board available to connect the C=64s PSU with my Midibox?

 

 

Greetings

Florestan

Edited by Florestan
Link to comment
Share on other sites

Hello and welcome to MIDIbox! :-)

 

You can build the PSU from electronics parts by following the schematic (it is not too difficult). This is necessary, if you have one or several MIDIbox SID modules (http://ucapps.de/mbhp_sid.html ).

If you are building an integrated SID synth (like the SammichSID, or the MB-6582), this is not necessary, as they have internal power sections.

 

Many greets,

Peter

Edited by Hawkeye
Link to comment
Share on other sites

since you already have the c64 psu (building your own is really easy) you should trace out where to take 12v (or 9v), 5v and ground from.

I don´t know the c64 psu, but it propably has some connectors or points that you can easily solder on.

To bring power to the gear i like to use 3 pin jacks and connectors like 3 pin din or xlr. I don´t see any nead for a pcb.

Link to comment
Share on other sites

  • 5 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...