schmidtc Posted October 1, 2014 Report Share Posted October 1, 2014 I built my second sammichSID a few years back and loaded V1.9g V2.0RC38 onto it, but only now am I getting around to actually putting some presets on it. When I upload v2_vintage_bank.syx only presets 34 and 36 actually take and it skips the rest. I tried sending the sammich_SID_Setup.hex over in case it needs the newer firmware, but this gives a "checksum mismatch error no response from core after 16 retries" I'll fiddle with transfering a sysex dump from my other sammich and try that route, but any advice is much appreciated. Maybe Wilba still has a buy me a beer icon. Quote Link to comment Share on other sites More sharing options...
TK. Posted October 13, 2014 Report Share Posted October 13, 2014 Hi, it seems that you are trying to upload SysEx with a bad MIDI interface. Please check the blacklist: http://www.midibox.org/dokuwiki/doku.php?id=midi_interface_blacklist&s[]=whitelist There is also a whitelist: http://www.midibox.org/dokuwiki/doku.php?id=midi_interface_whitelist The recommended "least cost" interface is Neusonik uMIDI/O22, available for 15 EUR e.g. from Thomann: http://www.thomann.de/de/neusonik_umidi_o22.htm Best Regards, Thorsten. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.