Help me on Project!

[Navicat]

I want to built a Midi to CV/Gate.

 

A DAW will feed the module with midi and Instruments will be triggered.

I need Midi in/through and USB midi, 16x CV and 16 Gates.

 

My Idea about what to be used is :

 

STM32F4 Core

2x AOUT_NG for 16 CV

1x DOUTx4 for 16 Gate triggers

Midi In and Thru and Midi USB

 

Is MIDIbox NG suitable for me???

[Navicat]

*BUMP*

 

PLZ Guys!! Can someone answer me that simple question??

I am asking again.

 

I Need a module that will only receive Midi.

 

1x DOUTx4 will give 16 Gate triggers

2x AOUT_NG will be daisy-chainned to give 16 CV channels for output a CV trigger that will control the velocity

Serial Midi in/Thru and usb MIDI is what i need

An STM32F4 Core will be used.

 

Is MIDIbox_NG suitable for this minimal module?

In Simple words.. I need a MIDI to 16 CV & 16 GATE Interface

[latigid on]

Sounds more like MIDIbox CV no? As far as I know only 8 CV channels are possible, but you might be able to have more gates. You'll need a level shifter if you want more than 3(.3) V gates i.e. 5 V or greater.