warpboy Posted March 16, 2015 Report Posted March 16, 2015 (edited) Hello, Everything was working well for a long time, but now when I open the session that I use, I can't change from from one pattern to another. It seems I have the problem only with group 2 when I change from A6 to A7 pattern The sequencer lcds stop working, but It continues to play.... I have tried to create a new blank session. It works, but I have to understand what is the problem. Seq v4 software is V0.87 The SD card is the same till now... Any idea ??? Thank you in advance Warpboy Edited March 16, 2015 by warpboy Quote
TK. Posted March 16, 2015 Report Posted March 16, 2015 Hi, could you please pack the problematic session into a .zip file and attach it to this posting? Best Regards, Thorsten. Quote
warpboy Posted March 16, 2015 Author Report Posted March 16, 2015 hello Thorsten, thank you so much. To be a bit more clear, the problem is with the group 2 only, when I want to go from the pattern A6 to A7, I can't !!! lcds freeze, no more control enable, I have to re-start the sequencer. Best regards Fabien04-2015.zip Quote
TK. Posted March 16, 2015 Report Posted March 16, 2015 It also crashes at my side. A quick analysis of the pattern data shows me that it's corrupted - I can't say why. Do you remember the moment when you stored the A7 pattern? Was there something special? (e.g. power interruption or similar?) I don't see an easy way to restore the pattern. In order to avoid the hang, you've to overwrite 2:A7 E.g. after power-on select group 2, press MENU+SAVE, select 2:A7, press the SAVE button and confirm the name. Best Regards, Thorsten. Quote
warpboy Posted March 17, 2015 Author Report Posted March 17, 2015 Yeeeeeeeeeees, thank you so much Thorsten !!!!! We have a live tomorrow, of course the midibox seq V4 is the heart... Today we have sun, if it's the same for you, take a beer ;-) Best regards Fabien Quote
warpboy Posted March 18, 2015 Author Report Posted March 18, 2015 hello, I was so happy with my session working again that I've not answered to your question : Do you remember the moment when you stored the A7 pattern? Was there something special? (e.g. power interruption or similar?) I have no guarantee about the reason : - quick electrical interrrupt -SD card problem, removed while it was saving datas.... I'll keep an eye, but It seems the reason is an external problem to the seq V4 and not inside it . Best regards Quote
warpboy Posted March 24, 2015 Author Report Posted March 24, 2015 hello, back again !!!!!! new session problem, I can't open/save/create..... any session, when the problem has started, I'll have a look at the info page in the midibox seq . Next to STOPWATCH on the right lcd I can read : Overrun SD card seems to be problematic. I try to look at the files inside with a computer but most of the time, I need to insert it two times in the sd card reader from my computer before I be able to read it. With another sd card everything is ok.......then I have copied my session from my computer to the new sd and it's not working any ideas ? thank you in advance Quote
TK. Posted March 25, 2015 Report Posted March 25, 2015 I'm really sorry about the trouble! :-( Currently I've no plausible explanation what is going on there with the given information. It could be that an electrical problem damaged not only the pattern, but also other (random) blocks on your old SD card, which is now leading to inconcistencies, but this is only speculation... Most important: don't store anything on the old SD card anymore! I would propose following approach: create a backup of the complete SD card (if possible) Then format it (or use the second card) Copy all files (not only a session) to the new filesystem. If this doesn't help we need to check this further with some terminal commands which I can't give you this week due to vacation... Best Regards, Thorsten. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.