xarolium Posted April 22, 2015 Report Share Posted April 22, 2015 Dear TK, I 'm building a midi interface based on Teensy3.1 (i know it will be simple to use Core32 module instead but don't have one yet) and i add 16 rotary encoders to my project connected as describe in the DIN module page. The problem is that i try to code to interface with the encoder but result is not very accurate. Could you share your piece of code you use to scan the encoder or put me on the way to get good result ? Best regards, Xarolium Quote Link to comment Share on other sites More sharing options...
TK. Posted April 26, 2015 Report Share Posted April 26, 2015 Hi, the code can be found here: http://svnmios.midibox.org/filedetails.php?repname=svn.mios32&path=%2Ftrunk%2Fmios32%2Fcommon%2Fmios32_enc.c Best Regards, Thorsten. Quote Link to comment Share on other sites More sharing options...
xarolium Posted April 27, 2015 Author Report Share Posted April 27, 2015 Dear TK, Thank you for the link, I spent lot of time to find this without success, i should be blind :pinch: Best regards, Xarolium Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.