Greschi Posted June 11, 2015 Report Share Posted June 11, 2015 Hello, i have an board here with an LPC1769 on it, but it's not the one from LPCxpresso. The pin assignment differs from the xpresso board. How can i change the MIOS to fit this board? Is it sufficient to create a new mios32_board.c file with new definitions and fuctions or do i have to consider some other changes? Best regards Gregor Quote Link to comment Share on other sites More sharing options...
kpete Posted June 12, 2015 Report Share Posted June 12, 2015 Why not just buy the right board. They are cheep enough. Quote Link to comment Share on other sites More sharing options...
Duggle Posted June 14, 2015 Report Share Posted June 14, 2015 I guess the most obvious problem would be when special function pins used by MIOS32 are assigned to other functions on your board. Potentially a lot of time and effort to resolve. Or maybe not, it depends on the board. As was alluded to, the cost benefit balance probably isn't there. Quote Link to comment Share on other sites More sharing options...
TK. Posted June 14, 2015 Report Share Posted June 14, 2015 Most files under mios32/LPC17xx define IO pinnings which maybe have to be adapted depending on the board layout. Best Regards, Thorsten. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.