**SOLVED** Wavetables - Is it possible to assign 2 Parameters at Start Position Zero?

[Smithy]

So in the Wavetable Sounds Tutorial #1 Page for MIDIbox SID V1, there is this jsynthlib screenshot:

 

 

This makes sense to me, it shows 2 different Parameters starting at Step 00.

However if I try to do it on MBSID V2, it duplicates the values for both parameters:

If I increase the value for Parameter one (Column 2) it also increases the value for parameter 2 (Column 3).

Rutgers Editor also only allows one value to be entered.

This seems to be the same in both the Lead and Multi Engine.

Is there a way of entering seperate values for each parameter, when they both start at step 00?

Thanks.

 

 

Edited January 26, 2016 by Smithy

[Hawkeye]

Welcome back, Smithy, how is Ireland? ;-)

Wild guess: WT1 BEG = WT 2 BEG, so both views map to the same memory byte, modifying one will also modify the other. Redemption: set WT2 BEG to a different value! :-)

Many greets,

Peter

[Smithy]

Thanks Hawkeye! U R GOOD FRIEND!

Rutgers Editor confused my understanding of the Wavetable Sequence:

I thought the knobs "Start Pos" and "End Pos" related to the Steps of the sequence.

But as Hawkeye explained they are Memory Addresses hence the $ sign.

TK Y U NEED 2 B PROGRAMMAR TO PLAY MBSID!
U R BAD FRIEND! ;) 

 

Just kidding, you are awesome friend.

Edited January 26, 2016 by Smithy