mb6582s in brushed finish (buchla ish)

[julianf]

Ive been cutting some buchla panels recently, so i thought i would use some of the material that i purchased for them to cut a couple of mb6582 panel sets.

 

This is the material, and the infill colour - 

 

 

 

Ill see if i cant take a photo of the mb6582s later, but, i think, they look pretty nice - just something a bit different from the usual black with white text!

 

Thank you, 

Julian

[julianf]

Just gotten around to taking a photo of this - 

 

 

Its a nice finish - probably nicer than the photo really shows.  Ill see if i cant take another photo of it mounted to one of the pactec cases.

 

Note - this material is brushed AND anodised.  The anodising means that it wont stain or scratch easily, like normal brushed does.

 

 

[Rowan]

Any chance of cutting a MB-SEQ set in with this material?

[julianf]

In what format? 

 

I ask, as it only comes up to 1.5mm, so would be no good for 19" units.

[Rowan]

In the same format that you currently do for the MB-SEQ panels, just a change of material. 

[julianf]

I cut at least three different formats.  The panel will work with the first and the last (both 17"), but it will be too thin for the 19".