macsaif Posted December 14, 2017 Report Posted December 14, 2017 Hello, I am building a 2 manual controller. I am using for upper manual a 61key Fater TP/8O and for the lower manual a 73 key Fatar TP/8O (on that manual the diodes are inverted-I had to do it because I have used it with a Roland controller board which had an inverted logic than the standard Fatar). My questions regarding the Midibox KB: 1.Is it possible to reconfigure the controller during play (not at initializing) for example by activating/deactivating an input of the board: - configure to which output channel I am sending info from which manual (1, 2, 3, 4 or 1+4) - cinfigure low trigger mode separately for each manual (when I play organ sounds) - Adjust octaves +/- 1-2octaves - Configure pitch bend and modulation wheel - to which midi channel they are sending data (1 or 4, or both) - Configure sustain switch and expression pedal in - to which midi channel they are sending data (1 or 4, or both) 2. How do I have to wire the connectors on the keybed with inverted diodes? - or it os better to resolder the diodes Thank you Frank Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.