Jump to content

Recommended Posts

Posted (edited)

Having finished my Seq v4 (Wilba version), I am not slowly learning all the functions going through the manual.

Every now and again, the 8 encoders and 8 buttons underneath on the right hand side so not work.

Before I pull it apart and check for loose connections, could it be a button combination or something that causes this?

Sometimes all I need to do is push a button or turn or click an encoder on the left hand side and all is good again. Sometimes it takes pushing a few buttons. By pushing, I do not mean firmly, but just normal function.

Just occasionally some of the left hand side has this issue, on a random number of steps from the right. The first few steps are always ok. 

The sequence will play all 16 steps OK.

Any ideas please?

EDIT: When switching on, it is always OK, so I reckon it is a button combination I am making in error.

Edited by Goseba
Posted (edited)

I've just been using it for a few hours and no problems until just now. Then suddenly the right encoders didn't work when I went to Edit Event. I had just come out playing a midi file (still testing the various functions).

I went to pattern mode, changed a pattern on the left and now the right side is all ok again. Weird.

EDIT: Also noticing that the Mute LED stays on for a while after leaving mute mode. 

Edited by Goseba
Posted (edited)

Fixed the strange operation of the encoders. Started to strip it down, gave all the IC's a push and one had a little give before it was in firmly. Switched it on and perfect!

Just the MUTE button stays on now. I found if I press the Pattern and then Song buttons, it clears it.

EDIT Just solved MUTE issue with v4_094b

Edited by Goseba

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...