goyousalukis Posted August 16, 2019 Report Share Posted August 16, 2019 Hey guys, I have a spare core board, and I would like to add 16 10k faders to my MBSeq Ver 4+ to control the note steps using an AIN board. What software would I load on the core, and what are my options for connecting it to my MBSeq core? Is there a way to do it through ethernet, so I don't lose a midi in on the Seq? Thanks, Justin Quote Link to comment Share on other sites More sharing options...
goyousalukis Posted August 16, 2019 Author Report Share Posted August 16, 2019 Ok, as usual, I was able to answer some of my questions. I see that there is a 3rd MIDI In/Out option for the Seq. And I assume I would use MidiBox NG. How do I make them talk together? Quote Link to comment Share on other sites More sharing options...
latigid on Posted August 17, 2019 Report Share Posted August 17, 2019 I'm not sure if CC is implemented for note steps. The encoders are also responsible for the UI in general. It would also be a lot of data to poll/update. But yes, _NG with AINSER would be the right direction. You can also get high-speed UART by removing the optocouplers. The connection is more fragile of course. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.