Adding Faders to MBSeqv4

[goyousalukis]

Hey guys, 

I have a spare core board, and I would like to add 16 10k faders to my MBSeq Ver 4+ to control the note steps using an AIN board. What software would I load on the core, and what are my options for connecting it to my MBSeq core? Is there a way to do it through ethernet, so I don't lose a midi in on the Seq? 

Thanks,

Justin

[goyousalukis]

Ok, as usual, I was able to answer some of my questions. I see that there is a 3rd MIDI In/Out option for the Seq. And I assume I would use MidiBox NG. How do I make them talk together?

[latigid on]

I'm not sure if CC is implemented for note steps. The encoders are also responsible for the UI in general. It would also be a lot of data to poll/update. 

But yes, _NG with AINSER would be the right direction. You can also get high-speed UART by removing the optocouplers. The connection is more fragile of course.