matcom3 Posted January 31, 2020 Report Share Posted January 31, 2020 hi midiboxers I know this is an ooooold project, but i just buildt a midi box seq v2 vintage with potentiometers and everything works perfect except the bankstick for SONGS, the paterns one works perfect but the second one for songs don´t, I buildt a board with ID0 for the paterns and ID1 for songs I¨ve tryed with ID7 and the same problem, is it correct? or the songs memory goes on another ID. I think this question is more for old midiboxers or even TK thank you Quote Link to comment Share on other sites More sharing options...
TK. Posted February 2, 2020 Report Share Posted February 2, 2020 Hi, by default it's assumed that a 64k EEPROM (24LC512) is used - in this case patterns and songs are stored into the same BankStick If you are using 32k 24LC256 instead, it will be required to change the CS number in the setup_mbseq_v2.asm file, and to rebuild the .hex file Best Regards, Thorsten. Quote Link to comment Share on other sites More sharing options...
matcom3 Posted February 8, 2020 Author Report Share Posted February 8, 2020 Thank you very much for the help and this wonderfull project Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.