Usb and position of midi conectors

[Synergic]

Hi!

Excuse me for being so heavy..but i´m having problems conecting core

to usb module.i have pluged in optoacoupler of core,and conect male

midi conector to j12 and j13 like say the schemattics.I conect

midi out conector to usb module midi in socket and midi in conector

to midi out socket...but it doesnt work...

But..if i change the order of wires(2 to 4 and 4 to 2) it works. Is this ok?

Another thing: if i sysex trought usb it happens the same thing like when i have incorrect software,midibox get loaded with an incorrect configuration,like corrupted.

Any suggestions Thorsten?

Thanks.

[TK.]

But..if i change the order of wires(2 to 4 and 4 to 2) it works. Is this ok?

...should be ok

if i sysex trought usb it happens the same thing like when i have incorrect software,midibox get loaded with an incorrect configuration,like corrupted.

please read again what I've wrote before about the MBHP_USB module in your last postings.

• The upload of a MIDIbox bank doesn't work with MIDI-Ox, but with Serges SysEx loader, required upload rate: 100 bytes/s
  
• The upload of MIOS code doesn't work with Serges SysEx loader, but with MIDI-Ox. The required settings can be found here: http://www.ucapps.de/mios_bootstrap.html
  
  Best Regards, Thorsten.
  
  FAQMARKER (so that I don't have to repeat myself every week... ;-) )

[Synergic]

...should be ok

okis.

please read again what I've wrote before about the MBHP_USB module in your last postings.

• The upload of a MIDIbox bank doesn't work with MIDI-Ox, but with Serges SysEx loader, required upload rate: 100 bytes/s
  
• The upload of MIOS code doesn't work with Serges SysEx loader, but with MIDI-Ox. The required settings can be found here: http://www.ucapps.de/mios_bootstrap.html
  
  Best Regards, Thorsten.
  
  FAQMARKER (so that I don't have to repeat myself every week... ;-) )
  I´m using serges Sysex loader at 100bytes/s.But it doesnt work.Excuse me for not explain it,my english is quite bad.Sorry and thanks.i´ll try slowest rate.