latigid on Posted November 20, 2021 Report Share Posted November 20, 2021 This one has been a long time coming but today we're ready to release MatriX. It has a similar form to the BLM16x16+X but now with mechanical keyswitches and full RGB backlighting as well as a joystick and OLED display. Peter has done a great job in reprogramming the 32-bit application, in particular to extend the LoopA. Check out some features in the video below! Essential kits are available here:https://www.midiphy.com/en/matrix/ Have fun building! Andy 1 Quote Link to comment Share on other sites More sharing options...
Hawkeye Posted November 20, 2021 Report Share Posted November 20, 2021 Thanks, Andy! Just to add a few more informations: all existing SEQ v4 are supported, as the BLM protocol is implemented. And here is a bit more tech detail: 289 (17x17) RGB-backlit and light|shielded mechanical keys with custom keycaps for optimal light dispersion. Full-color 128x128 high-end OLED display running at 60Hz for info and graphical sequence/clip previewing. Extra sliders and buttons for parameter entry and additional functions. Two bidirectional MIDI ports and a dedicated button to switch between them. Dedicated navigation joystick for moving selections, scrolling through clips/sequences and more! High-performance STM32F4 MCU using RTOS as a software base for a responsive and fluid user experience. Full midiphy SEQ v4+ and MIDIbox SEQ v4 support - compatible with existing BLM 16x16+X protocol. Enhanced LoopA support: advanced editor with note color mapping and pan/zoom controls (microtiming), 160 scales (with note quantization), reassignable isomorphic keyboard and performance controls. Here's a direct link to the user manual: midiphy MatriX manual v1.01 Also, here's another close-up photo of the MatriX in LoopA mode - in this mode you can use the x and y sliders to scale the visible sequence area and use the joystick to pan around the area: And yes, you can see new keycaps on here - Andy has done absolutely amazing, outstanding work designing these (of course next to the general hardware design). I think his old BLM 16x16+X design now has a worthy successor. Cheers! Best regards and have a good weekend, Peter Quote Link to comment Share on other sites More sharing options...
Hawkeye Posted April 8, 2022 Report Share Posted April 8, 2022 Cheers, as the first batch sold out quite quickly: the MatriX DIY Essential kits are now restocked: as the ADC chips are currently hard to obtain, we've secured enough of them and will provide those required MCP3208 analog-digital converter chips for free in every kit. Also: free worldwide shipping to all destinations supported by the midiphy shop (customs fees might apply outside the EU). https://www.midiphy.com/en/shop-details/0/85/midiphy-matrix-with-pro-metal-case-essential-kit-diy Many greets and enjoy! Peter Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.